Breath Screw Plug (Red Seal)
It is manufactured by Tuna Vida to be used to relieve pressure between 0.150-0.250 bar in reducers and gearboxes.
A red screw plug is installed in case of oil leakage due to vibrations during transportation.
1/4, 1/8, 3/8
In all kinds of gearboxes and systems, it is inevitable for the gears to come into contact with each other and to produce very small metal particles as a result of this contact. These particles are mixed with the oil used. With the magnetic plug, the particles in the oil in the system (in special projects of the reducer/reducer/gear systems) can be collected with the magnetic plug. Small metal parts are separated from the oil, preventing the gears from being damaged.
M8x1, M8x1.25, M10x1, M10x1.5, M12x1, M14x1.5, M16x1.5, M18x1.5, M20x1.5, M22x1.5, M24x1.5, M26x1.5
The indicator plug should be used to observe the oil level in gear systems (reducer, gearbox, etc.) from the outside and to prevent the system from being oil-free.
In accordance with the temperature and pressure in the system
Type A: medium pressure and heat (1 bar and 100 degrees)
Type B: high pressure and heat (1-5 bar and 180 degrees)
It can be manufactured in desired dimensions in accordance with the level of
M10x1, M12x1.5, M14x1.5, M16x1.5, M22x1.5, M27x2
Production can be made according to the desired coating form in accordance with the order from steel or aluminum material. Products are delivered with screw plug attached.
We manufacture special hex plugs, imbus and hexagonal caps in accordance with standards or needs and projects, especially in DIN 908 and DIN 7604 norms. It can be used in all kinds of mechanical and hydraulic systems. Our products are sent to the customer with their screw plugs attached. Operating temperature: -20C / 120C
G1/8, M10x1, G1/4, G3/8, G1/2, G2/4, G1
Breather / ventilation plug made of aluminum material should be used to prevent pressure build-up in gear systems (reducer, gearbox, etc.) and to ventilate the system. A double layer 45 micron (mash) 304 stainless filter is placed in the lower part of the plug so that the oil in the system does not come out of the plug with the air.
All of the plugs are pressure tested and delivered as 100% controlled and sealed. The plugs can be manufactured in desired dimensions.
It is used as connection bolt in reactionary batteries. The battery connection bolt is known as the battery cell connection screw. quality checks have been made. The production dates of the produced bolts can be printed on them and the product can be tracked.
A colored locking application was applied to the tip of the bolt, and a lead application was applied to the hole in the upper part, which provides conductivity.
M10x22, M10x18, M10x30